Bob Fox Bob Fox's Profile Page

Bob Fox Bob Fox

0 Course Enrolled • 0 Course Completed

Biography

RCNI Practice Exam & RCNI Best Questions & RCNI Certification Training

Our company always lays great emphasis on service. All of our works have good sense of service. Once you browser our website and select the RCNI exam questions, we have arrange all study materials separately and logically. You will know the details if you click the RCNI practice quiz. You will find that it is easy, fast and convenient. And if you have something confused on our RCNI learning braindumps, then you can contact with our service online or send email to us. We will help you in the first time.

RUCKUS RCNI Exam Syllabus Topics:

Topic
Details

Topic 1

RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.

Topic 2

ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.

Topic 3

ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2
3 protocols, and ICX services, IPv4
IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.

Topic 4

Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.

>> RCNI Examcollection Vce <<

RCNI Instant Download - New RCNI Exam Objectives

Our RCNI learning quiz can lead you the best and the fastest way to reach for the certification and achieve your desired higher salary by getting a more important position in the company. Because we hold the tenet that low quality RCNI exam materials may bring discredit on the company. Our RCNI learning questions are undeniable excellent products full of benefits, so our RCNI exam materials can spruce up our own image and our exam questions are your best choice.

RUCKUS Certified Networking Implementer Sample Questions (Q35-Q40):

NEW QUESTION # 35
Which command can be used to identify Cyclic Redundancy Check (CRC) errors on port Ethernet 1/1/1?

A. show interfaces brief ethernet 1/1/1
B. show port security ethernet 1/1/1
C. show mac-address ethernet 1/1/1
D. show statistics ethernet 1/1/1

Answer: D

NEW QUESTION # 36
When using zero-touch stacking, which two prerequisites must be in place to ensure all devices join the stack?
(Choose two.)

A. configure each unit's management IP, VLANs, and tagging
B. issue stack disable on intended member devices
C. enable stacking on all devices
D. enable stacking on the active controller
E. ensure units have clean configurations

Answer: C,E

Explanation:
Zero-touch stacking simplifies the process of forming a stack by automating the configuration. To ensure all devices join the stack seamlessly, the following prerequisites must be met:
* Enable Stacking on All Devices:
* Access each switch's CLI.
* Enter global configuration mode: configure terminal.
* Enable stacking by executing: stack enable.
* Save the configuration with: write memory.
* Ensure Units Have Clean Configurations:
* It's crucial that switches have default configurations to prevent conflicts during the stacking process.
* To reset a switch to its default settings:
* Enter global configuration mode: configure terminal.
* Execute the command: write erase.
* Reload the switch to apply the default configuration: reload.
* Additional Considerations:
* Ensure all switches are running compatible firmware versions to prevent software mismatches.
* Verify that stacking cables are correctly connected to facilitate proper communication between units.
References:
* For a comprehensive guide on building an ICX stack using zero-touch provisioning, consult the RUCKUS Community Forums.

NEW QUESTION # 37
A Wi-Fi access point is configured for management traffic on the default VLAN and a guest SSID on VLAN
10. The access point is connected to port 1/1/10.
What is the correct configuration?

A. vlan 10
tagged ethernet 1/1/10
B. vlan 10
no untagged ethernet 1/1/10
C. vlan 1
no untagged ethernet 1/1/10
!
vlan 10
tagged ethernet 1/1/10
D. vlan 1
no tagged ethernet 1/1/10
!
vlan 10
untagged ethernet 1/1/10

Answer: C

NEW QUESTION # 38
Which device will become the root in the Spanning Tree election process?

A. the device with the highest IP address
B. the device with root guard enabled
C. the device with the lowest bridge ID
D. the device with the highest bridge priority value

Answer: D

NEW QUESTION # 39
Which two commands can be used to display the IP address of a device attached to a switch port? (Choose two.)

A. show mac-address all
B. show interface brief wide
C. show lldp neighbor detail
D. show arp
E. show interface

Answer: C,D

Explanation:
To determine the IP address of a device connected to a specific switch port on a RUCKUS ICX switch, the following commands can be utilized:
* show lldp neighbor detail
This command provides detailed information about devices connected via LLDP, including their IP addresses.
Command Usage:
show lldp neighbor detail
Output Example:
Local Port: 1/1/2
Neighbor MAC: 60d0.2c1c.1cd0
System Name: RuckusAP
Management Address: 192.168.0.3
In this example, the Management Address field displays the IP address of the connected device on port 1/1/2.
Ruckus Wireless Community
* show arp
The Address Resolution Protocol (ARP) table maps IP addresses to MAC addresses. By examining the ARP table, you can identify the IP address associated with a device's MAC address.
Command Usage:
show arp
Output Example:
IP Address MAC Address Type Age Port
192.168.0.3 60d0.2c1c.1cd0 Dynamic 0 1/1/2
Here, the IP address 192.168.0.3 is associated with the MAC address 60d0.2c1c.1cd0 on port 1/1/2.
Ruckus Wireless Community
Note: For the show lldp neighbor detail command to provide IP addresses, LLDP must be enabled on both the switch and the connected devices. Additionally, the devices should support LLDP and be configured to advertise their management addresses.

NEW QUESTION # 40
......

Elementary RCNI practice engine as representatives in the line are enjoying high reputation in the market rather than some useless practice materials which cash in on your worries. We can relieve you of uptight mood and serve as a considerate and responsible company with excellent RCNI Exam Questions which never shirks responsibility. It is easy to get advancement by our RCNI study materials. On the cutting edge of this line for over ten years, we are trustworthy company you can really count on.

RCNI Instant Download: https://www.itcertking.com/RCNI_exam.html

Bob Fox Bob Fox

Biography

Join Our Community